Uses
Works Best On:
- Hard Wood
- Glass & Metal
Works Good On:
- Balsa Wood
- Soft Wood
- Fibreglass
- Ceramics
- Hard Plastics
- White Foam
- Reinforcing
Directions
Quik-Cure™ 5 minute epoxy is an equal two-part adhesive that forms high-strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
Quik-Cure™ is the least temperature-sensitive of our epoxies. It will cure in temperatures down to 5˚C. Temperatures above 32˚C shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.
Quik-Cure™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. The lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured Quik-Cure™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.
Kobus Smit (verified owner) –